420 GSM Heavyweight French Terry Crewneck Sweatshirt | VOID MX Signature
420 GSM organic cotton French terry. Architectural Boxy fit. Peached outer face. Unbrushed loopback interior. Tonal embroidery.
A 420 GSM French terry crewneck sweatshirt with a softly peached outer face and understated tonal embroidery. VOID MX Signature applies face-only Triple Carbon Peach to dense organic cotton three-end French terry, creating a fine, matte exterior. The knitted loops inside remain unbrushed.
The dedicated Architectural Boxy sweatshirt cut combines a generous chest with controlled dropped shoulders and full-length set-in sleeves. A 2×2 rib crewneck, 7 cm cuffs, and a 7 cm bottom rib define the edges without turning the body into a cropped or tightly cinched shape.
Choose Black-on-Black or White-on-White. Raised tiger-head embroidery matches the garment color, bringing the chest detail into view through texture and light rather than contrast.
Wear it over a T-shirt with straight-leg pants, or on its own with denim. MX is the softer-surface option in our heavyweight essentials.
Detail
Specification
Product family
420 GSM Signature Loopback Jersey
Main fabric
100% organic cotton, three-end French terry
Main fabric weight
420 GSM, 420 grams per square meter
Outer surface
Face-only Triple Carbon Peach; finely peached, matte cotton
Interior
Unbrushed integral loopback; no brushed fleece or added lining
Fit
Architectural Boxy; dedicated crewneck sweatshirt pattern
Sleeves
Full-length set-in sleeves with controlled dropped shoulders
Neckline
Crewneck with 2×2 rib trim; approximately 2.5 cm finished height
Cuffs
2×2 rib, 7 cm finished height; included in total sleeve length
Bottom hem
2×2 rib, 7 cm finished height; included in body length
Rib composition
95% organic cotton / 5% elastane
Branding
Raised tonal tiger-head chest embroidery and woven side label
Color options
Black-on-Black / White-on-White
Size range
XS–2XL; unisex
Triple Carbon Peach refines the outer face only. The face and knitted loops are two sides of one French terry fabric, not separate layers. The 420 GSM weight describes that complete main fabric, not a jersey outer layer with added backing.
MX Signature and BX Armor share a dedicated Architectural Boxy crewneck sweatshirt pattern: a generous chest, controlled dropped shoulders, and full-length set-in sleeves. The ribbed hem gives the lower edge mild shape without turning the body into a cropped or tightly cinched silhouette.
Our size labels are intentionally generous. Start with the body-chest guide, then compare a sweatshirt you own with the finished measurements below. At a boundary between sizes, choose using your preferred proportions and the garment chart rather than assuming a universal size conversion.
Recommended Body Chest
Size
Body chest — cm
Body chest — inches, approx.
XS
92–102
36.2–40.2
S
102–112
40.2–44.1
M
112–122
44.1–48.0
L
122–132
48.0–52.0
XL
132–142
52.0–55.9
2XL
142–152
55.9–59.8
Finished Crewneck Sweatshirt Measurements
Size
Half chest
Body length
Shoulder width
Sleeve length
XS
58 / 22.83
70 / 27.56
53 / 20.87
59 / 23.23
S
63 / 24.80
72.5 / 28.54
55 / 21.65
60 / 23.62
M
68 / 26.77
75 / 29.53
57 / 22.44
61 / 24.02
L
73 / 28.74
77.5 / 30.51
59 / 23.23
62 / 24.41
XL
78 / 30.71
80 / 31.50
61 / 24.02
63 / 24.80
2XL
83 / 32.68
82.5 / 32.48
63 / 24.80
64 / 25.20
Body length includes the complete 7 cm ribbed hem. Sleeve length includes the complete 7 cm cuff.
Do not add either rib height to the measurements above.
How to Measure
Measurement
How to measure
Body chest
Measure around the fullest part of your chest with the tape level and relaxed. This is a body circumference, not a flat garment width.
Half chest
Lay the sweatshirt flat and measure straight across between the underarm/side-seam intersections. Do not use an arbitrary below-armhole offset.
Body length
Measure from the high shoulder point at the side-neck attachment seam to the finished bottom edge. Exclude collar height and include the full bottom rib.
Shoulder width
Measure straight across the back between the shoulder-to-sleeve seam intersections.
Sleeve length
Measure from the shoulder-to-sleeve seam along the relaxed upper sleeve to the finished cuff edge, including the entire cuff. Do not measure from the center back of the neck.
Measure the garment dry and relaxed, without stretching the body or ribs. Use this crewneck sweatshirt chart rather than the T-shirt, Henley, or raglan sweatshirt chart.
For additional guidance, see our Size & Fit Guide.
VOID pairs a solid black or white sweatshirt with raised tiger-head embroidery in the same color. The logo is defined by thread relief and changing light rather than contrasting thread.
Color option
Body color
Chest embroidery
Black-on-Black
Solid black
Raised black tonal tiger-head embroidery
White-on-White
Solid white
Raised white tonal tiger-head embroidery
Both MX Signature and BX Armor use these tonal pairings. MX has a peached outer face; BX keeps its face unbrushed. Both retain the same unbrushed loopback interior.
Our crewneck sweatshirt quality standard sets requirements for the finished French terry and the assembled garment. It covers fabric weight, dimensional change, surface appearance, colorfastness, and twisting after washing.
Property
Required standard
Test reference
Finished main-fabric weight
420 GSM ±5% — 399–441 g/m²
ASTM D3776/D3776M
Dimensional change
No more than 5% in either length or width after five complete wash-and-dry cycles
ISO 3759, ISO 6330, and ISO 5077
Pilling and fuzzing
Grade 4 or higher at the prescribed stages through 7,000 rubs; face and reverse assessed separately
ISO 12945-2, assessed under ISO 12945-4
Wash colorfastness
Color change and staining: Grade 4 or higher
ISO 105-C06, A1M
Dry rubbing colorfastness
Grade 4 or higher
ISO 105-X12
Wet rubbing colorfastness
Black, Burnt Umber, and Dark Earth shell: Grade 3 or higher; White shell: Grade 4 or higher
ISO 105-X12
Garment spirality
No more than 3% after the specified five-cycle laundering program
ISO 16322-3
The standard also covers rib recovery, seam security, loopback integrity, and embroidery appearance. These are product acceptance requirements, not individual measured results for every color, size, or production lot. Single-jersey T-shirt test results do not establish this French terry sweatshirt’s performance.
The dimensional-change program uses 30°C washing and line drying. The separate 40°C laboratory wash-colorfastness method is not a home-care instruction. Always follow the attached care label.
Care step
Instruction
Wash
Machine wash cold, maximum 30°C / 86°F, on a gentle cycle. Turn inside out and wash with similar colors. Wash dark colors separately.
Bleach
Do not bleach.
Dry
Do not tumble dry. Gently reshape and line dry in the shade without stretching the neck or shoulders.
Iron
Use low heat on the reverse only if permitted by the garment care label. Avoid direct heat or pressure on the embroidery and, on MX, the peached outer face.
Always follow the care label attached to your sweatshirt.
Two surface finishes, one crewneck sweatshirt fit. Both series use 420 GSM organic cotton three-end French terry with an unbrushed integral loopback reverse.
Detail
MX Signature
BX Armor
Outer face
Face-only Triple Carbon Peach; finely peached and matte
Clean, compact, unbrushed jersey-knit face
Interior
Unbrushed knitted loops
The same unbrushed loopback construction
Fit and measurements
Architectural Boxy; dedicated set-in crewneck sweatshirt pattern
The same finished measurements
Sleeves
Full-length set-in sleeves with controlled dropped shoulders
The same sleeve construction
Neckline, cuffs, and hem
2×2 rib crewneck; 7 cm cuffs and hem
The same rib construction
Choose it for
A softer, peached outer surface
A clean, unbrushed cotton face
Choose by the outer surface you prefer. MX does not have a fleece-brushed interior, and BX does not use a different size chart. Both retain the loopback reverse and the same sweatshirt proportions.
Question
Answer
How is VOID MX different from VOID BX?
Both share the same Architectural Boxy crewneck sweatshirt pattern, finished measurements, rib construction, and unbrushed loopback interior. MX has face-only Triple Carbon Peach for a softer, matte exterior. BX keeps the outer face unbrushed.
Is the inside brushed fleece?
No. The interior has visible, unbrushed knitted loops. Triple Carbon Peach is applied to the outside; it does not turn the reverse into fleece.
Is the logo contrasting or tonal?
Tonal. The black sweatshirt has raised black tiger-head embroidery, and the white sweatshirt has raised white embroidery. The detail is defined by stitching and light, not a contrasting thread color.
Is the whole sweatshirt 100% cotton?
The main French terry is 100% organic cotton. The neckline, cuffs, and hem use a separate 95% organic cotton / 5% elastane rib blend.
Topic
Details
Destinations
Shipping is available to selected international destinations. Available methods, charges, and delivery estimates appear at checkout.
Processing
Orders are typically processed within 1–3 business days after confirmation. Processing time is separate from shipping time.
Returns
Eligible return requests must be submitted within 16 days of delivery, subject to the Returns & Exchanges Policy and applicable consumer rights.
Condition
Returned items must meet the policy requirements, including being unworn, unused, unwashed, and returned with original tags attached.
Exchanges
Subject to approval, product availability, and destination requirements.
Read the Shipping & Delivery Policy and Returns & Exchanges Policy for complete terms.
