420 GSM French Terry Raglan Crewneck Sweatshirt | VOID MX Signature
420 GSM organic cotton French terry. Architectural Boxy raglan fit. Peached outer face. Unbrushed loopback interior. Tonal embroidery.
A 420 GSM French terry raglan sweatshirt that brings a softly peached surface to a solid black or white palette. VOID MX Signature uses face-only Triple Carbon Peach on dense organic cotton, while the integral loopback interior stays unbrushed.
Front and back raglan seams run from the neckline to the underarms, forming a continuous shoulder contour instead of conventional set-in shoulder seams. The dedicated Architectural Boxy raglan pattern gives the chest generous room and keeps the body full-length, not cropped.
Raised black-on-black or white-on-white tiger-head embroidery adds texture at the left chest without a contrasting graphic. A 2×2 rib crewneck, 7 cm cuffs, and a 7 cm hem define the edges with restrained shaping rather than a tightly cinched waist.
Wear it over a T-shirt with denim or straight-leg pants. MX brings a softer outer surface to our heavyweight essentials.
Detail
Specification
Product family
420 GSM Signature Loopback Jersey
Main fabric
100% organic cotton, three-end French terry
Main fabric weight
420 GSM, 420 grams per square meter
Outer surface
Face-only Triple Carbon Peach; finely peached, matte cotton
Interior
Unbrushed integral loopback; no brushed fleece or added lining
Fit
Architectural Boxy; dedicated raglan sweatshirt pattern
Sleeve construction
Full-length raglan sleeves; no conventional set-in shoulder seam
Raglan seams
Front and back diagonal seams from the neckline to the underarms
Neckline
Crewneck with 2×2 rib trim; approximately 2.5 cm finished height
Cuffs
2×2 rib, 7 cm finished height
Bottom hem
2×2 rib, 7 cm finished height; included in body length
Rib composition
95% organic cotton / 5% elastane
Branding
Raised tonal tiger-head chest embroidery and woven side label
Color options
Black-on-Black / White-on-White
Size range
XS–2XL; unisex
Triple Carbon Peach refines the outside only. The face and knitted loops are formed together as one French terry fabric, not as an outer jersey layer with added backing.
MX Signature and BX Armor share a dedicated Architectural Boxy raglan sweatshirt pattern: a generous chest, a continuous shoulder contour, and a full-length, non-cropped body. Front and back diagonal seams connect the neckline to the underarms instead of using conventional set-in shoulder seams.
Our size labels are intentionally generous. Start with the body-chest guide, then compare the published chest and body-length measurements with a sweatshirt you own. At a boundary between sizes, use your preferred proportions and the garment chart rather than assuming a universal size conversion.
Recommended Body Chest
Size
Body chest - cm
Body chest - inches, approx.
XS
92–102
36.2–40.2
S
102–112
40.2–44.1
M
112–122
44.1–48.0
L
122–132
48.0–52.0
XL
132–142
52.0–55.9
2XL
142–152
55.9–59.8
Finished Raglan Sleeve Sweatshirt Measurements
Measurements describe the finished garment before home laundering. This chart lists half chest and body length; it does not provide a numerical raglan sleeve length.
Size
Half chest
Body length
XS
58 / 22.83
70 / 27.56
S
63 / 24.80
72.5 / 28.54
M
68 / 26.77
75 / 29.53
L
73 / 28.74
77.5 / 30.51
XL
78 / 30.71
80 / 31.50
2XL
83 / 32.68
82.5 / 32.48
Body length includes the complete 7 cm ribbed hem and excludes the collar.
Do not add the hem height to the measurement above.
How to Measure
Measurement
How to measure
Body chest
Measure around the fullest part of your chest with the tape level and relaxed. This is a body circumference, not a flat garment width.
Half chest
Lay the sweatshirt flat and measure straight across between the underarm/side-seam intersections. Do not measure at an arbitrary point below the armholes.
Body length
Measure from the side-neck high point at the neck attachment seam straight down to the finished bottom edge, parallel to the center front. Include the full bottom rib and exclude collar height.
Raglan sleeve comparison
Raglan sleeve length uses a defined neck-side starting point and includes the cuff. It is not a conventional shoulder-to-cuff measurement, an underarm measurement, or the length of a diagonal raglan seam.
Measure the garment dry and relaxed, without stretching the body or ribs.
Do not use the set-in Crewneck Sweatshirt shoulder-width or sleeve-length columns for this raglan style.
For additional guidance, see our Size & Fit Guide.
VOID pairs a solid black or white sweatshirt with raised tiger-head embroidery in the same color. The logo is defined by thread relief and changing light rather than contrasting thread.
Color option
Body color
Chest embroidery
Black-on-Black
Solid black
Raised black tonal tiger-head embroidery
White-on-White
Solid white
Raised white tonal tiger-head embroidery
Both MX Signature and BX Armor use these tonal pairings. MX has a peached outer face; BX keeps its face unbrushed. Both retain the same unbrushed loopback interior.
Our raglan crewneck sweatshirt quality standard sets requirements for the finished French terry and the assembled garment.
It covers fabric weight, dimensional change, surface appearance, colorfastness, and twisting after washing.
Property
Required standard
Test reference
Finished main-fabric weight
420 GSM ±5% — 399–441 g/m²
ASTM D3776/D3776M
Dimensional change
No more than 5% in either length or width after five complete wash-and-dry cycles
ISO 3759, ISO 6330, and ISO 5077
Pilling and fuzzing
Grade 4 or higher at the prescribed stages through 7,000 rubs; face and reverse assessed separately
ISO 12945-2, assessed under ISO 12945-4
Wash colorfastness
Color change and staining: Grade 4 or higher
ISO 105-C06, A1M
Dry rubbing colorfastness
Grade 4 or higher
ISO 105-X12
Wet rubbing colorfastness
Black, Burnt Umber, and Dark Earth shell: Grade 3 or higher; White shell: Grade 4 or higher
ISO 105-X12
Garment spirality
No more than 3% after the specified five-cycle laundering program
ISO 16322-3
The raglan standard also addresses front and back diagonal seam balance, neckline stability, and sleeve movement during forward reach and arm elevation.
These are requirements for the raglan garment, not evidence that a set-in sweatshirt test has verified its sleeve or neckline construction.
Care step
Instruction
Wash
Machine wash cold, maximum 30°C / 86°F, on a gentle cycle. Turn inside out and wash with similar colors. Wash dark colors separately.
Bleach
Do not bleach.
Dry
Do not tumble dry. Gently reshape and line dry in the shade without stretching the neck or shoulders.
Iron
Use low heat on the reverse only if permitted by the garment care label. Avoid direct heat or pressure on the embroidery and, on MX, the peached outer face.
Always follow the care label attached to your sweatshirt.
Two surface finishes, one Architectural Boxy raglan fit. Both series use 420 GSM organic cotton three-end French terry with an unbrushed integral loopback reverse.
Detail
MX Signature
BX Armor
Outer face
Face-only Triple Carbon Peach; finely peached and matte
Clean, compact, unbrushed jersey-knit face
Interior
Unbrushed knitted loops
The same unbrushed loopback construction
Fit and body measurements
Architectural Boxy; dedicated raglan sweatshirt pattern
The same raglan fit and published body measurements
Sleeves
Full-length raglan sleeves; front and back neckline-to-underarm seams
The same raglan construction
Neckline, cuffs, and hem
2×2 rib crewneck; 7 cm cuffs and hem
The same rib construction
Choose it for
A softer, peached outer surface
A clean, unbrushed cotton face
Choose by the outer surface you prefer.
Both retain the unbrushed loopback interior and the same raglan construction. Neither uses the conventional set-in shoulder seams of our separate Crewneck Sweatshirt.
Question
Answer
What makes this a raglan sweatshirt?
Front and back sleeve seams run diagonally from the neckline to the underarms. There is no conventional set-in shoulder seam. The body uses a dedicated Architectural Boxy raglan pattern.
How does VOID MX differ from VOID BX?
Both share the same raglan fit, published body measurements, rib construction, and unbrushed loopback interior. MX has face-only Triple Carbon Peach for a softer, matte outer surface. BX keeps the outer face unbrushed.
Is the inside brushed fleece?
No. The interior retains visible, unbrushed knitted loops. The MX peached finish is applied to the outside, not the loopback reverse.
Is the logo tonal or contrasting?
Tonal. Black has raised black tiger-head embroidery, and white has raised white embroidery. The logo is present; its definition comes from thread relief and light rather than a contrasting thread color.
Topic
Details
Destinations
Shipping is available to selected international destinations. Available methods, charges, and delivery estimates appear at checkout.
Processing
Orders are typically processed within 1–3 business days after confirmation. Processing time is separate from shipping time.
Returns
Eligible return requests must be submitted within 16 days of delivery, subject to the Returns & Exchanges Policy and applicable consumer rights.
Condition
Returned items must meet the policy requirements, including being unworn, unused, unwashed, and returned with original tags attached.
Exchanges
Subject to approval, product availability, and destination requirements.
Read the Shipping & Delivery Policy and Returns & Exchanges Policy for complete terms.
