420 GSM Heavyweight French Terry Pullover Hoodie | VOID MX Signature
420 GSM organic cotton French terry. Architectural Boxy fit. Drawstring-free double-layer hood. Peached outer face. Tonal embroidery.
A 420 GSM French terry pullover hoodie with a softly peached outer face and understated tonal embroidery. VOID MX Signature applies face-only Triple Carbon Peach to dense organic cotton three-end French terry. The reverse keeps its integral, unbrushed knitted loops rather than a fleece finish.
The double-layer hood pairs a substantial French terry outer with a lighter, color-matched organic cotton jersey lining. Its front ends meet without overlap, drawstrings, or eyelets. One wide kangaroo pocket connects two reinforced hand openings to a shared pouch, leaving the pullover front uninterrupted.
Generous chest room, dropped shoulders, and full-length set-in sleeves define the Architectural Boxy silhouette. The non-cropped body and sleeves finish with 7 cm rib trims. Black-on-black or white-on-white raised tiger-head embroidery adds texture at the left chest without a contrasting graphic.
Wear it over a T-shirt with denim or straight-leg pants. MX brings a softer outer surface to our heavyweight essentials.
Detail
Specification
Product family
420 GSM Signature Loopback Jersey
Main fabric
100% organic cotton, three-end French terry
Main fabric weight
420 GSM, 420 grams per square meter
Outer surface
Face-only Triple Carbon Peach; finely peached, matte cotton
Main-fabric reverse
Unbrushed integral loopback; no fleece brushing
Fit and sleeves
Architectural Boxy; dropped shoulders and full-length set-in sleeves
Hood construction
Double layer; French terry outer and lighter organic cotton jersey lining
Hood lining
Color-matched organic cotton single jersey, 220–260 GSM
Hood opening
Clean, drawstring-free edge; front ends meet without overlap
Front construction
Continuous pullover front; no zipper, drawcord hardware, eyelets, or cord channel
Pocket
One wide kangaroo patch pocket; two angled openings into one shared pouch
Pocket reinforcement
Both ends of each hand opening reinforced
Cuffs and hem
2×2 rib, 7 cm finished height; included in sleeve and body lengths
Rib composition
95% organic cotton / 5% elastane
Branding
Raised tonal tiger-head chest embroidery and woven side label
Color options
Black-on-Black / White-on-White
Size range
XS–2XL; unisex
The main French terry is one integral knit: its face and reverse loops are formed together, not bonded as separate layers. Triple Carbon Peach is applied to the outer face only. The separate jersey lining is confined to the hood, not the body.
MX Signature and BX Armor share the same Architectural Boxy pullover hoodie pattern: generous chest room, dropped shoulders, full-length set-in sleeves, and a non-cropped body. The hood and kangaroo pocket are part of this hoodie’s own construction, not additions to the raglan sweatshirt pattern.
Our size labels are intentionally generous. Start with the body-chest guide, then compare a hoodie you own with the finished measurements below. At a boundary between sizes, use your preferred proportions and layering needs rather than assuming a universal size conversion.
Recommended Body Chest
Size
Body chest - cm
Body chest - inches, approx.
XS
92–102
36.2–40.2
S
102–112
40.2–44.1
M
112–122
44.1–48.0
L
122–132
48.0–52.0
XL
132–142
52.0–55.9
2XL
142–152
55.9–59.8
Finished Pullover Hoodie Measurements
Size
Half chest
Body length
Shoulder width
Sleeve length
XS
58 / 22.83
70 / 27.56
53 / 20.87
59 / 23.23
S
63 / 24.80
72.5 / 28.54
55 / 21.65
60 / 23.62
M
68 / 26.77
75 / 29.53
57 / 22.44
61 / 24.02
L
73 / 28.74
77.5 / 30.51
59 / 23.23
62 / 24.41
XL
78 / 30.71
80 / 31.50
61 / 24.02
63 / 24.80
2XL
83 / 32.68
82.5 / 32.48
63 / 24.80
64 / 25.20
Body length includes the complete 7 cm hem rib. Sleeve length includes the complete 7 cm cuff.
Do not add either rib height to the figures above.
How to Measure
Measurement
How to measure
Body chest
Measure around the fullest part of your chest with the tape level and relaxed. This is a body circumference, not a flat garment width.
Half chest
Lay the hoodie flat. Measure straight across 2.5 cm vertically below the underarm intersections. This is the hoodie-specific measuring point, not the underarm-level method used on our T-shirts and some sweatshirts.
Body length
Move the hood clear. Measure from the high shoulder point at the shoulder/neck join straight down to the finished bottom edge, parallel to the center front. Include the full hem rib; do not include the hood.
Shoulder width
Measure straight across the back between the shoulder-to-sleeve seam intersections.
Sleeve length
Measure from the shoulder-to-sleeve seam intersection along the top sleeve fold to the finished cuff edge, including the complete cuff. Do not use a raglan or center-back-neck measurement.
Measure the garment dry and relaxed, without stretching the body or ribs. Check body length and sleeve length as well as chest width.
For additional guidance, see our Size & Fit Guide.
VOID pairs a solid black or white pullover hoodie with raised tiger-head embroidery in the same color. The logo is defined by thread relief and changing light rather than contrasting thread.
Color option
Body color
Chest embroidery
Black-on-Black
Solid black
Raised black tonal tiger-head embroidery
White-on-White
Solid white
Raised white tonal tiger-head embroidery
Both MX Signature and BX Armor use these tonal pairings. MX has a peached outer face; BX keeps its face unbrushed. Both retain the same unbrushed loopback interior.
Our pullover hoodie quality standard applies to the finished French terry and the assembled garment, including the hood, pocket, and rib interfaces.
The table lists required performance criteria, not individual measured results for every color, size, or production lot.
Property
Required standard
Test reference
Finished main-fabric weight
420 GSM ±5% — 399–441 g/m²
ASTM D3776/D3776M
Fabric dimensional change
No more than 5% absolute change in shell length or width under the specified care test
AATCC TM135
Garment dimensional change
No more than 5% absolute change in finished garment length or width under the specified care test
AATCC TM150
Garment twist
No more than 3% after the specified care procedure
AATCC TM179
Outer-face pilling resistance
Grade 4 or higher at the product-specific test endpoint
ISO 12945-2
Wash colorfastness
Grade 4 or higher for color change and staining
ISO 105-C06
Dry rubbing colorfastness
Grade 4 or higher
ISO 105-X12
Wet rubbing colorfastness
Grade 4 or higher, all body colors
ISO 105-X12
The standard also addresses seam security, pocket-entry reinforcement, rib recovery, embroidery retention, and the usability of the hood and shared kangaroo pouch after care. Shell, hood lining, and ribs are assessed for compatibility in the completed hoodie.
Care step
Instruction
Wash
Machine wash cold, maximum 30°C / 86°F, on a gentle cycle. Turn inside out and wash with similar colors. Wash dark colors separately.
Bleach
Do not bleach.
Dry
Do not tumble dry. Gently reshape and line dry in the shade without stretching the neck or shoulders.
Iron
Use low heat on the reverse only if permitted by the garment care label. Avoid direct heat or pressure on the embroidery and, on MX, the peached outer face.
For washing, drying, and ironing, follow the care label attached to your hoodie. Its instructions apply to the complete garment, including the French terry shell, organic cotton jersey hood lining, rib trims, and embroidery.
Do not use the laboratory methods in the quality table as home-care instructions.
Two surface finishes, one Architectural Boxy pullover hoodie fit. Both series use 420 GSM organic cotton three-end French terry with an unbrushed integral loopback reverse.
Detail
MX Signature
BX Armor
Outer face
Face-only Triple Carbon Peach; finely peached and matte
Clean, compact, unbrushed French terry face
Main-fabric reverse
Unbrushed integral knitted loops
The same unbrushed loopback construction
Fit and measurements
Architectural Boxy; dedicated pullover hoodie pattern with set-in sleeves
The same finished measurements and sleeve construction
Hood
Drawstring-free double-layer hood; French terry outer and 220–260 GSM organic cotton single-jersey lining
The same hood construction
Pocket
One wide kangaroo pocket; two angled entries into a shared pouch
The same pocket construction
Cuffs and hem
2×2 rib; 7 cm finished height
The same rib construction
Choose it for
A softer, peached outer surface
The natural definition of an unbrushed cotton face
Choose by the outer surface you prefer. Neither series adds drawstrings, eyelets, or a front zipper, and the MX finish does not turn the loopback interior into brushed fleece.
Question
Answer
How does VOID MX differ from VOID BX?
Both share the same Architectural Boxy pullover pattern, finished measurements, double-layer hood, kangaroo pocket, and rib construction. MX has face-only Triple Carbon Peach for a softer outer surface; BX keeps the face unbrushed. The terry reverse remains unbrushed in both.
Does the hood have drawstrings or a front zipper?
No. The hood has no drawcords, eyelets, or cord channel, and the garment has a continuous pullover front without a zipper. The hood’s front ends meet without overlap.
Is the hood made from two layers of 420 GSM French terry?
No. The outer hood uses the same 420 GSM French terry as the body. Inside the hood is a separate, color-matched 220–260 GSM organic cotton single-jersey lining.
Is the chest logo tonal or contrasting?
Tonal. The black hoodie has raised black tiger-head embroidery, and the white hoodie has raised white embroidery. The logo is present; its shape comes through thread relief and light rather than a contrasting color.
Topic
Details
Destinations
Shipping is available to selected international destinations. Available methods, charges, and delivery estimates appear at checkout.
Processing
Orders are typically processed within 1–3 business days after confirmation. Processing time is separate from shipping time.
Returns
Eligible return requests must be submitted within 16 days of delivery, subject to the Returns & Exchanges Policy and applicable consumer rights.
Condition
Returned items must meet the policy requirements, including being unworn, unused, unwashed, and returned with original tags attached.
Exchanges
Subject to approval, product availability, and destination requirements.
Read the Shipping & Delivery Policy and Returns & Exchanges Policy for complete terms.
