420 GSM Heavyweight French Terry Pullover Hoodie | VOID BX Armor
420 GSM organic cotton French terry. Architectural Boxy fit. Drawstring-free double-layer hood. Clean unbrushed face. Tonal embroidery.
A 420 GSM boxy pullover hoodie with a clean, unbrushed cotton face and a restrained black-and-white palette. VOID BX Armor retains the knit definition of dense organic cotton three-end French terry, with an integral unbrushed loopback reverse and no fleece brushing.
The Architectural Boxy cut gives the chest room, with dropped shoulders and full-length set-in sleeves. A double-layer hood combines the French terry outer with lighter, color-matched organic cotton jersey inside. Its clean opening has no drawstrings or eyelets, and the front has no zipper.
Two reinforced, angled hand entries connect to one wide kangaroo pouch. The non-cropped body and sleeves finish with 7 cm rib trims. Raised black embroidery on black, or white embroidery on white, keeps the tiger-head detail tonal.
Pair this heavyweight hoodie with denim or relaxed pants as part of a contemporary essentials wardrobe.
Detail
Specification
Product family
420 GSM Signature Loopback Jersey
Main fabric
100% organic cotton, three-end French terry
Main fabric weight
420 GSM, 420 grams per square meter
Outer surface
Clean, compact, unbrushed French terry face; no Triple Carbon Peach
Main-fabric reverse
Unbrushed integral loopback; no fleece brushing
Fit and sleeves
Architectural Boxy; dropped shoulders and full-length set-in sleeves
Hood construction
Double layer; French terry outer and lighter organic cotton jersey lining
Hood lining
Color-matched organic cotton single jersey, 220–260 GSM
Hood opening
Clean, drawstring-free edge; front ends meet without overlap
Front construction
Continuous pullover front; no zipper, drawcord hardware, eyelets, or cord channel
Pocket
One wide kangaroo patch pocket; two angled openings into one shared pouch
Pocket reinforcement
Both ends of each hand opening reinforced
Cuffs and hem
2×2 rib, 7 cm finished height; included in sleeve and body lengths
Rib composition
95% organic cotton / 5% elastane
Branding
Raised tonal tiger-head chest embroidery and woven side label
Color options
Black-on-Black / White-on-White
Size range
XS–2XL; unisex
BX preserves the unbrushed French terry face through finishing. The outer face and loopback reverse form one fabric; the lighter single-jersey lining belongs only inside the hood.
MX Signature and BX Armor share the same Architectural Boxy pullover hoodie pattern: generous chest room, dropped shoulders, full-length set-in sleeves, and a non-cropped body. The hood and kangaroo pocket are part of this hoodie’s own construction, not additions to the raglan sweatshirt pattern.
Our size labels are intentionally generous. Start with the body-chest guide, then compare a hoodie you own with the finished measurements below. At a boundary between sizes, use your preferred proportions and layering needs rather than assuming a universal size conversion.
Recommended Body Chest
Size
Body chest - cm
Body chest - inches, approx.
XS
92–102
36.2–40.2
S
102–112
40.2–44.1
M
112–122
44.1–48.0
L
122–132
48.0–52.0
XL
132–142
52.0–55.9
2XL
142–152
55.9–59.8
Finished Pullover Hoodie Measurements
Size
Half chest
Body length
Shoulder width
Sleeve length
XS
58 / 22.83
70 / 27.56
53 / 20.87
59 / 23.23
S
63 / 24.80
72.5 / 28.54
55 / 21.65
60 / 23.62
M
68 / 26.77
75 / 29.53
57 / 22.44
61 / 24.02
L
73 / 28.74
77.5 / 30.51
59 / 23.23
62 / 24.41
XL
78 / 30.71
80 / 31.50
61 / 24.02
63 / 24.80
2XL
83 / 32.68
82.5 / 32.48
63 / 24.80
64 / 25.20
Body length includes the complete 7 cm hem rib. Sleeve length includes the complete 7 cm cuff.
Do not add either rib height to the figures above.
How to Measure
Measurement
How to measure
Body chest
Measure around the fullest part of your chest with the tape level and relaxed. This is a body circumference, not a flat garment width.
Half chest
Lay the hoodie flat. Measure straight across 2.5 cm vertically below the underarm intersections. This is the hoodie-specific measuring point, not the underarm-level method used on our T-shirts and some sweatshirts.
Body length
Move the hood clear. Measure from the high shoulder point at the shoulder/neck join straight down to the finished bottom edge, parallel to the center front. Include the full hem rib; do not include the hood.
Shoulder width
Measure straight across the back between the shoulder-to-sleeve seam intersections.
Sleeve length
Measure from the shoulder-to-sleeve seam intersection along the top sleeve fold to the finished cuff edge, including the complete cuff. Do not use a raglan or center-back-neck measurement.
Measure the garment dry and relaxed, without stretching the body or ribs. Check body length and sleeve length as well as chest width.
For additional guidance, see our Size & Fit Guide.
VOID pairs a solid black or white pullover hoodie with raised tiger-head embroidery in the same color. The logo is defined by thread relief and changing light rather than contrasting thread.
Color option
Body color
Chest embroidery
Black-on-Black
Solid black
Raised black tonal tiger-head embroidery
White-on-White
Solid white
Raised white tonal tiger-head embroidery
Both MX Signature and BX Armor use these tonal pairings. MX has a peached outer face; BX keeps its face unbrushed. Both retain the same unbrushed loopback interior.
Our pullover hoodie quality standard applies to the finished French terry and the assembled garment, including the hood, pocket, and rib interfaces.
The table lists required performance criteria, not individual measured results for every color, size, or production lot.
Property
Required standard
Test reference
Finished main-fabric weight
420 GSM ±5% — 399–441 g/m²
ASTM D3776/D3776M
Fabric dimensional change
No more than 5% absolute change in shell length or width under the specified care test
AATCC TM135
Garment dimensional change
No more than 5% absolute change in finished garment length or width under the specified care test
AATCC TM150
Garment twist
No more than 3% after the specified care procedure
AATCC TM179
Outer-face pilling resistance
Grade 4 or higher at the product-specific test endpoint
ISO 12945-2
Wash colorfastness
Grade 4 or higher for color change and staining
ISO 105-C06
Dry rubbing colorfastness
Grade 4 or higher
ISO 105-X12
Wet rubbing colorfastness
Grade 4 or higher, all body colors
ISO 105-X12
The standard also addresses seam security, pocket-entry reinforcement, rib recovery, embroidery retention, and the usability of the hood and shared kangaroo pouch after care. Shell, hood lining, and ribs are assessed for compatibility in the completed hoodie.
Care step
Instruction
Wash
Machine wash cold, maximum 30°C / 86°F, on a gentle cycle. Turn inside out and wash with similar colors. Wash dark colors separately.
Bleach
Do not bleach.
Dry
Do not tumble dry. Gently reshape and line dry in the shade without stretching the neck or shoulders.
Iron
Use low heat on the reverse only if permitted by the garment care label. Avoid direct heat or pressure on the embroidery and, on MX, the peached outer face.
For washing, drying, and ironing, follow the care label attached to your hoodie. Its instructions apply to the complete garment, including the French terry shell, organic cotton jersey hood lining, rib trims, and embroidery.
Do not use the laboratory methods in the quality table as home-care instructions.
Two surface finishes, one Architectural Boxy pullover hoodie fit. Both series use 420 GSM organic cotton three-end French terry with an unbrushed integral loopback reverse.
Detail
MX Signature
BX Armor
Outer face
Face-only Triple Carbon Peach; finely peached and matte
Clean, compact, unbrushed French terry face
Main-fabric reverse
Unbrushed integral knitted loops
The same unbrushed loopback construction
Fit and measurements
Architectural Boxy; dedicated pullover hoodie pattern with set-in sleeves
The same finished measurements and sleeve construction
Hood
Drawstring-free double-layer hood; French terry outer and 220–260 GSM organic cotton single-jersey lining
The same hood construction
Pocket
One wide kangaroo pocket; two angled entries into a shared pouch
The same pocket construction
Cuffs and hem
2×2 rib; 7 cm finished height
The same rib construction
Choose it for
A softer, peached outer surface
The natural definition of an unbrushed cotton face
Choose by the outer surface you prefer. Neither series adds drawstrings, eyelets, or a front zipper, and the MX finish does not turn the loopback interior into brushed fleece.
Question
Answer
Is BX brushed or peached?
No. BX Armor keeps the French terry face unbrushed and does not receive Triple Carbon Peach. Its reverse loops also remain unbrushed.
Does BX fit differently from MX?
No. Both use the same Architectural Boxy pullover hoodie pattern and finished measurements, including the same hood, pocket, and rib construction. Choose by the outer surface you prefer.
Is the body lined like the hood?
No. The body’s inside is the integral loopback reverse of the French terry. Only the hood has a separate, color-matched organic cotton single-jersey lining.
Are there two separate front pockets?
No. The two angled hand openings lead into one shared kangaroo pouch. Both ends of each entry are reinforced; there is no center zipper dividing the pocket.
Topic
Details
Destinations
Shipping is available to selected international destinations. Available methods, charges, and delivery estimates appear at checkout.
Processing
Orders are typically processed within 1–3 business days after confirmation. Processing time is separate from shipping time.
Returns
Eligible return requests must be submitted within 16 days of delivery, subject to the Returns & Exchanges Policy and applicable consumer rights.
Condition
Returned items must meet the policy requirements, including being unworn, unused, unwashed, and returned with original tags attached.
Exchanges
Subject to approval, product availability, and destination requirements.
Read the Shipping & Delivery Policy and Returns & Exchanges Policy for complete terms.
